|
The A7V Überlandwagen supply carrier was built on the
chassis of the famous German A7V Sturmpanzerwagen, the first and
only German tank to see operational service in the First World War.
In the A7V, twin Daimler 100-h.p. engines were
mounted side by side in the centre with a control position, arranged
for drive in either direction, placed on a platform above the
engines. The suspension was derived from the Holt tractor
suspension, the American tractor which had also provided the early
inspiration for British and French tanks. The A7V Sturmpanzerwagen
had a box-like enveloping superstructure but when it was first
conceived the design committee also made allowance for the chassis
to be fitted with an alternative load carrier body.
A total of 30 A7V Überlandwagen (“Over-land vehicle”
as the supply carrier version was called) was projected but not all
were completed before the war ended. In the Ûberlandwagen a canopy
was provided over the central control position and wood dropsides
and ends were fitted fore and aft of the engine compartment. In some
vehicles rails were added to support a tarpaulin cover over the load
spaces. The vehicle had a top speed of 13 km/h and was crewed by a
driver and one assistant. The seats in the control position
swivelled and the controls were duplicated for driving in either
direction without the need for turning. Tow hooks were fitted at
both ends of the chassis.
By the end of September 1917, a tracked transport column (ArmeeKraftwagen-Kolonne-Raupe
Nr 1111) had been formed experimentally using Überlandwagen
vehicles. The column was equipped with eight vehicles, chassis
numbers 508 to 515, and was sent to Northern France in November
1917. First reports indicated that the carriages worked well. The
vehicle was used up until the end of the war, mainly for transport
of
general stores and ammunition up to front line
positions.
|




|
|
Contents of the kit:

Click on the
pictures for an enlarged version!

|
The kit comes
packed in a small but sturdy card-board box typical of MGM. It
has no instructions, save for two sheets of colour photos, showing the
built model. As far as I know, this is the first model kit ever made
of this strange vehicle!
The kit itself comes in a yellow,
medium-hard resin. There is no small amounts moulding flash on the
parts, but they are in general easily cleaned off. Some of the
parts, expecially the big carrier, has quite prominent moulding
stubs, that will require something of an effort to get rid of. The
moulding itself is sharp and exact. In fact, the moulding of MGM is
getting better and better. They still have to attain the hights of,
say, Al.By, but they are geting better and better.
The kit itself consists of some 23+
parts, the most prominent being the carrier body, the two tracks -
obviously modified from EMHAR's A7V kit - the engine compartment and the drivers cabin.
It also comes with a piece of wire, to be used for the rails to
support the tarpaulin.
As far as I can see,
the accuracy of this kit is very good, and I find it hard to fault!
The kits of MGM can can be bought through
through Smallscale.de, 7th Company
or
Blitzkrieg Models.
|